Sonance PS-S210SUBT Dual 10" Subwoofer

SonanceTuotekoodi SON_40192

Varasto:
Uusi erä tulossa
Pyydä tarjous

Kuvaus

Professional Series


Sonance PS-S210SUBT Dual 10" Bandpass Subwoofer

The PS-S210SUBT utilizes all-new 2 x 10” (254mm) low profile, high excursion drivers, that were specifically engineered in-house by Sonance for this product. The polyurethane-coated, laminated-plywood enclosure features an extremely shallow design which allows it to be used in a wide range of specialty applications such as under restaurant booths or banquettes (using the included feet), or mounted onto the side of rafters, on walls or under ceilings (with the optional C-bracket).

One of the most unique and versatile features of the PS-S210SUBT is the ability to port either from the front or the side of the enclosure. The installer simply unscrews the port from the front of the cabinet, and then unscrews a blanking plate from the side, and swaps them. This will allow the product to be used in a variety of installation locations, while always ensuring the optimum sonic performance is achieved.

The PS-S210SUBT features Sonance’s Laminated Core Technology transformer (SLCT), delivering full-fidelity performance in either 70V or 100V mode. This, combined with the built-in low pass filter, allows the subwoofer to be driven on the same feed as the other full-range loudspeakers in a system, negating the need for additional amplifier channels and DSP.

 

Frequency Range (-10dB) 34Hz - 155Hz
Frequency Range (-3dB) 44Hz - 132 Hz
Power Capacity 500 Watts Continuous Program Power | 300 Watts Pink Noise
Nominal Sensitivity 94dB
Nominal Coverage 180 degrees conical coverage
Directivity Factor (Q) N/A
Directivity DI N/A
Rated Maximum SPL 121dB @ 1 meter (3.3 feet), 127dB peak
Rated Impedence 4 Ohms nominal, 3.7 Ohms minimum
Transformer Taps 300W, 150W, (75W 70V)
Crossover Point 150Hz
Overall Dimension 9" Height x 33" Width x 13.78" Depth (228mmx 838mm x 350mm)
Net Weight 61 lbs (27.7kgs)
Shipping Weight 75.8lbs (33 kgs)
Unit of Measure Single
LF Driver Dual 10" (254mm) woven glass fiber cones with Butyl rubber surrounds
Input Connector Four pin, Euroblock with loop output connections
Safety Agency None
Suspension Points 4 x M10 on two sides
Cabinet Laminated plywood
Optional Accessory

C-Bracket with 4 x M10 mounting bolts


Maksu ja turvallisuus

PayPal Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Saatat myös pitää

Äskettäin katsottu